RDIx03 is a DTU of RS485-LoRaWAN independently developed by ManThink Technology Co. Ltd with highly flexible configuration and low power consumption. It is embedded with a high-performance MCU of NXP and a Radio chip SX127x of Semtech. It can get data from several slave devices by RS485 and uploading data to platform through LoRaWAN network.Users can quickly and flexibly configure DTU's working mode as needed,and quickly occupy the market.
Name | Defined |
N | AC-N |
L | AC-L |
485A | 485A |
485B | 485B |
120Ω | if the salve devices is long distance to RDIx03 and the communication is interfered,connect this port to 485A |
INT | I/O input |
GND | GND |
12V+ | 12V+ |
key | click the key,RDIx03 will excute all query commands by RS485,and then upload data by LoRaWAN |
RU | LED indicator for system application run status. It blinks in one second when the system is running normally. |
LR | LED indicator for uplink or downlink,it will blink once when RDIx03 sending data or receiving data by LoRaWAN. |
TX | LED indicator for RS485,It blinks when RDI511A is sending data to RS485. |
RX | LED indicator for RS485,It blinks when RDI511A is receiving data from RS485. |
Operating voltage | AC 85V~270VDC/12V |
Operating temperature | -40℃ ~ 85℃ |
Working humidity | 0%~95%RH |
Protection level | IP53 |
Power | <3W |
Working frequency | 410-510MHz/863-928MHz |
Transmitting power | 20 ± 0.5dBm |
Reception sensitivity | -139dBm @292bps |
Data transmission rate | 0.3~4.5kbps |
Modulation mode | LoRa |
Supports LoRaWAN band | CN470/EU868/AU915/AS923 |
Supports LinkWAN band | CN470/AS923 |
Antenna impedance | 50Ω |
Size:89.2mm * 35.8mm * 65.4mm