01
Start with conditions and leaks
Place temperature, humidity, leak and air-quality sensors in offices and equipment rooms as required.
Choose spot or rope probes for KS52; select KS61 by measurements and power configuration.BUILDING / FROM ONE POINT TO THE WHOLE BUILDING
Bring your building’s equipment
together.
Add environmental monitoring points and connect existing utility meters and equipment. Use ManThink sensors, collectors and gateways to bring field data into ThinkLink.
Environment & leaksWater & electricity meteringDevice status
See how the products work together ↓
FIELD → PRODUCT / CHOOSE FOR YOUR SITE
The right products for your challenges.
02
Keep your existing meters
Keep working water meters, electricity meters and instruments; acquire and parse their outputs with EdgeBus.
Use the matching RS-485 or M-Bus collector and confirm protocols and programs before integration.
03
Bring equipment status online
Select from actual signals: door states, run feedback, or existing analog pressure and level outputs.
KS32 accepts dry contacts. KS31’s 4–20 mA and 0–10 V versions are separate configurations and must not be mixed.
RECONNECT / KEEP EXISTING EQUIPMENT WORKING
Start with the actual interface.
Build on existing integrations.
Confirm interfaces, power and device protocols before choosing collectors and adapters.
EdgeBus integration documentation is available for these third-party devices.
CONNECT → THINK / CHOOSE YOUR DEPLOYMENT
Connected through a gateway. Where will the platform run?
Connect to external ThinkLink
GD6 has no built-in platform. Connect it to cloud or freely self-hosted ThinkLink.
Field devices→GD6 gateway→External platform
Choose a GD6 gateway ↗Full ThinkLink inside the gateway
Quad-core processor · 1 GB RAM · 16 GB eMMC. The platform runs on the gateway.
Field devices→GD7 gateway + ThinkLink
Choose a GD7 gateway ↗Match the gateway to indoor/outdoor conditions, power, backhaul and regional bands; assess coverage and capacity on site.
THINKLINK / FROM DATA TO APPLICATIONS
From individual measurements to building operations.
- Organize devices and data by building, floor and subsystem.
- Bring environmental changes, energy trends and alerts into one view.
- AI assists troubleshooting; control actions require human confirmation.
START WITH YOUR SITE / START WITH YOUR SITE
Bring your site requirements.
Let’s select the right products.
Discuss smart buildings ↗Prepare these details for a selection discussion:
- Buildings, floors and measurement-point count
- Existing device models, interfaces and protocols
- Power availability and gateway locations
- Cloud or local platform requirements