In LoRaWAN-based IoT systems, reducing power consumption while maintaining data accuracy is critical. The COV (Change of Value) algorithm enables event-driven communication by transmitting data only when significant changes occur. This article explains the working principle of COV and demonstrates how Manthink implements it in EdgeBus and ThinkLink to optimize energy efficiency and network scalability. […]

Battery life is a critical factor in wireless metering systems. This article analyzes the power consumption performance of the KC22 LoRaWAN collector based on real long-term testing in an M-Bus heat meter scenario. By comparing high-frequency test data with real deployment conditions, we estimate the practical battery life in heating applications. The article also demonstrates

1. Solution Overview In IoT deployments, low power consumption, long-range communication, and stable data acquisition are critical. This solution integrates: to build a complete wireless distance monitoring system. 2. DYP-A02 Sensor Features Feature Description Small blind zone Only 3 cm Multiple interfaces Modbus / UART / PWM / Analog წყალproof design Suitable for harsh environments

With the modernization of district heating systems, many older residential communities are upgrading traditional heat meters to smart metering systems. Manual meter reading is inefficient and lacks real-time monitoring capability. By combining LoRaWAN wireless communication, M-Bus data acquisition, and an IoT platform, heat meters can be remotely monitored without large-scale infrastructure reconstruction. This article introduces

With the rapid development of IoT technologies, LoRaWAN has become widely adopted in smart cities, industrial monitoring, environmental sensing, and energy management due to its long communication range, low power consumption, and wide coverage. However, during large-scale deployments, many projects encounter a puzzling issue after running for some time: the network signal appears strong, yet

For battery-powered IoT systems, DTU power consumption calculation plays a critical role in determining device lifetime and maintenance cost. Accurate power analysis helps engineers design proper battery capacity, optimize communication strategies, and extend device operation for years. This article explains the power consumption components of a LoRaWAN DTU, introduces calculation methods, and provides practical engineering

As IoT deployments scale from dozens of devices to hundreds or even thousands, manual configuration quickly becomes inefficient and error-prone. Repeating the same setup steps for devices, data models, or automation rules can significantly slow down project deployment. To address this challenge, the ThinkLink platform provides powerful bulk import and export capabilities. By using Excel

When deploying a LoRaWAN network, one of the most common questions is whether to choose an indoor gateway or an outdoor gateway. Although both types use similar communication technology, they differ significantly in protection level, installation environment, coverage characteristics, and deployment cost. This article explains the key differences between indoor and outdoor LoRaWAN gateways based

Retrofitting existing water meters into a LoRaWAN network is one of the most common requirements in smart water utility and irrigation modernization projects. However, many deployments fail due to high wiring complexity, unstable power supply, lack of remote configuration, and poor scalability. This article introduces a proven Smart Water Meter LoRaWAN Retrofit Solution based on

In industrial IoT retrofitting projects, connecting traditional wired sensors such as RS-485 and Modbus devices to LoRaWAN networks is a common requirement. However, existing protocol conversion approaches often compromise between network capacity, power efficiency, scalability, and development cost. This article analyzes the limitations of three conventional approaches and explains how EdgeBus (EB) redefines LoRaWAN terminal